Categories All
Mokhanni oa LED o timang

Lapeng> Products > Mokhanni oa LED o timang

DALI Single Output Dimmable LED Driver 0-10V 50W 1400mA Bakeng sa Leseli


Sebaka sa OriginChina
Name BrandTSOHLE
tiiseletsweCE
Number ModelKS50ADP-1400MCP1H-A4
Ntho e nyenyane ea litaelo50PCS
thekoUS$1-10
Nako ea thomello2-7 Matsatsi
Terms tefelloT / T
Matla a ho Fana20000PCS ka letsatsi
Details Product
Mokhoa oa ho fifalaDALI/0-10V/1-10V/PUSH DIM/RX/PWMPhatlalatso ea Nako1400/1350/1280/1230/ 1200/1140/1090/1040mA
Tlhahiso ea mofuta'Mala o le mongkhumo gagamalo9-42V
Frequency ea ho tsoa50 / 60HzKeletso ho gagamalo180-264Vac
khumo Power30WWarranty3 Years
Size166 * 52.5 * 30.5mmlintho tse bonahalangPC
Boemo ba IPIP43 Bakeng sa Ka hareNo Load Voltage53V
ProtectionMoroalo o fetelletseng, Voltage e fetelletseng, Hajoale, Nako e khuts'oaneTypeKamehla e teng
PFC0.9

Lesedi le PhahamengDownlight Dimmable LED Driver 50W, 1400mA Dimmable LED Driver, DALI Single Output Dimming LED Controller
Tlhaloso ea Sehlahisoa
Tlhahlobo ea Sehlahiswa
DALI 0-10V Downlight Dimmable LED Driver 50W 1400mA For Downlight, Constant Current Single Output Dimming LED Controller
1) Product SUMMARY

KS50ADP-1400MCP1H-A4 is a 50W 1400mA AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. 【KS50ADP-1400MCP1H-A4 】can be connected to DALI main controller or Touch DIM to a chieve a smooth dimming effect.

2) Likopo

Application of Dimable LED Driver:  Downlight, Panel light, Spotlight, Ceililing Light, Decoration Light, Floor light, Flood light.

Setšoantšo-1

3) Product Features

Single channel output, output current level selectable

Constant current type

Meet DALI Protocol IEC 62386

Support Touch-DIM function

Ho sebetsa hantle haholo ho fihlela ho 82%

Built-in active PFC function, PF=0.9

Dimming effect smooth, no flicker

Protections: Short circuit, over load, Over voltage

4) Lintlha tsa Setsebi
ea mohlalaKS50ADP-1400MCP1H-A4
khumoHona joale (MA)1400/1350/1280/1230/1200/1140/1090/1040mA
Current Tolenrance± 5%
Ripper and Noise200mVp-leq
Palo ea li-volts9-42Vdc
Channel± 0.3%
No load ouput voltage± 0.5%
inputAC Voltage range180 ~ 264VAC
PC Factor0.9@230VAC,Full load
bokgoni≥86%
AC Current (max)0.17Amax@230VAC
Matla a emeng<0.5W
Inrush Current (Max)Cold start 50A/240V AC
Ho dutla ha hajoale<3.5mA/240VAC
LitšireletsoBoima bo fetang110%-130% of rated power
Nako e khutšoanyaneProtection mode: auto recovery after short circuit faults removed
Ho feta mojaroProtection mode: auto recovery after short circuit faults removed
Over voltageProtection mode: shot off output voltage, restart to recovery
tikoloho e khahlangMosebetsi Temp.-25 ~ 40 ℃
Mongobo oa Mosebetsi20%-90% RH no condensation
Storage Temp.-25 ~ 80 ℃
Khanyetso ea khatellorevolution 280±10%, 45 mins,X.Y.Z three directions
Tlosa tlhahlobo600mm
Ho phahamaCommon mode 4KV, different mode 2KV
Polokeho le EMCTekanyetso ea polokehoDesign by standard:GB9254-1998,GB17625.1-2003,
DALI e tloaelehilengIEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0
E mamella voltageI/P-O/P 2KVAC I/P-FG 2KVAC O/P-FG 500VAC
Ho thibela ho thibelaI/P-O/P .I/P-FG .O/P-FG: >100MΩ/500VDC/25℃/70%RH
EMC EissionDesign by standard: EN55022B, Class B
Harmonic hona joaleDesign by standard:GB17625.1; EN61000-3-2, -3 limitation requirement.
Ho itšireletsa mafung EMCDesign by standard: EN55024; EN61000-4-2,3,4,5,6,8,11
MTBF≥30000 hours 40°C
Ba bang baHo sebetsa Temp-20 ° C ~ 50 ° C
Storage Temp. Humidity-40°C~85°C, 20-90%Rh
tc90 ° C
lintho tse bonahalangflame-resistant PC
IP RatingIP20
Bophelong30000Hrs@tc:80°C
WarrantyGuaranty ea Lilemo tse 3
Swithcing Cycle> Makhetlo a 15000
itokisa50PCS/Carton; 8.25kg/Carton; Carton Size: 319*254*136mm(L*W*H)
teba ka166 * 52.5 * 30.5mm
5) Dimming Function

1. Press the Push DIM (Touch DIM) switch for 8s or more,the driver can be controlled via Push DIM switch.

2. Short press the Push DIM (Touch DIM) switch (<0.5s) to control the lamp on or off.

3. Long press the Push DIM (Touch DIM) switch (>0.5s) to dim the brightness of light. The dimming direction will change every time after pressing switch.

4. Double-click the Push DIM (Touch DIM) switch (<0.3s), then all lamps connected on the device will be set maximum brightness.

5. The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when doing the adjustment with long pressing Push DIM (Touch DIM) switch.

6. With the Power off memory function, the power-down state will be recovered when power on again.

6)  Cautions

1. This product should be installed by qualified personnel.

2. This product is non waterproof, need to avoid sun and rain.In case of outdoor use, please ensure it is mounted in a water proof enclosure.

3. Good heat dissipation conditions extend product life. Please install the product in a well-ventilated environment.

4. Please make sure LED power supply output voltage, current is used to meet the product requirements.

5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.

6. Due to safety concerns, PVC or rubber cord of 0.75- 1.5mm² is recommended for input and output terminal(s)(excluding signal terminals). Flat power cord is not suitable.Ensure all wire
connections and polarities are correct before applying power to avoid any damages to the LED lights.

7. In case of malfunction, do not repair it yourself.

7) Other similiar models
ea mohlalaTypeisolated/not isolatedMokhoa oa ho fifalamatlaKeletso ho gagamaloPFNo load voltagekhumo gagamaloPhatlalatso ea NakoMofuta oa tlhahisoProduct SizeL*W*H
KS15ADP-420MCP2H-A2Kamehla e tengtse lingDALI15W180-264V0.956V9-42V420/390/360/330/300/270/240/210mAkopanetsoe145 * 45 * 29.5mm
KS15ADP-420MCP1H-A2Kamehla e tengtse lingDALI15W180-264V0.956V9-42V420/390/370/330/310/290/260/230mASingle145 * 45 * 29.5mm
KS30ADP-900MCP1H-A3Kamehla e tengtse lingDALI30W180-264V0.953V9-42V900/840/790/730/700/650/600/540mASingle154 * 49.5 * 30.5mm
KS50ADP-1400MCP1H-A4Kamehla e tengtse lingDALI50W180-240V0.953V9-42V1400/1350/1280/1230/1200/1140/1090/1040mASingle166 * 52.2 * 30.5mm

Setšoantšo-2

Setšoantšo-3

Setšoantšo-4

Bokhoni ba Feme
1. Moetsi oa litsebi

Phihlelo ea lilemo tse 17, feme ea lisekoere-mithara tse 10,000, basebetsi ba 400+, mela e 8 ea tlhahiso

2. Tsamaiso ea Saense

ISO9001: Tsamaiso ea Tsamaiso ea Boleng ea 2015 e netefalitsoe, tsamaiso ea 7S

3. Lihlopha tse ikemetseng tsa R&D

Lihlopheng tse 10+ tsa Baenjiniere, bokhoni ba R&D bo ikemetseng le bo ikemetseng

4. Lisebelisoa tse tsoetseng pele

Semela sa SMT, mochini o sollang leqhubu, Semi-auto assembling, EMC lab, Test Lab, kamore ea botsofali jj.

Setšoantšo-4


Lipotso le Likarabo tsa Bareki
    Ha e lumellane le lipotso leha e le life!
U ka tšoaea lihlahisoa tseo u li hlokang 'me ua buisana le rona ka boto ea melaetsa.

ModelMokhoa oa ho fifalaTypematlaKeletso ho gagamalokhumo gagamaloPhatlalatso ea NakoTlhahiso ea mofutaSize
KS15ADP-420MCP2H-A2DALIKamehla e teng15WAC 180-264VDC 9-42V420/390/360/330/ 300/270/240/210mAWarm/cool145 * 45 * 29.5mm
KS15ADP-420MCP1H-A2DALIKamehla e teng15WAC 180-264VDC 9-42V420/390/370/330/ 310/290/260/230mASingle145 * 45 * 29.5mm
KS30ADP-900MCP1H-A3DALIKamehla e teng30WAC 180-264VDC 9-42V900/840/790/730/ 700/650/600/540mASingle154 * 49.5 * 30.5mm
KS50ADP-1400MCP1H-A4DALIKamehla e teng50WAC 180-264VDC 9-42V1400/1350/1280/1230/ 1200/1140/1090/1040mASingle166 * 52.2 * 30.5mm
dipatlisiso
ModelSIZE/MMAC INPUTDC SEHLOOHO VOLT. SEHLAHANG NKHOANEPUSELETSO MOKHALIHO SENYAPCS / CTNLEQEPHE

Lihlopha tse chesang